3Com 3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE Switch, User Manual

Page: 109 / 256

Defining System Settings 109
less. This is known as Daylight Savings Time, or Summer Time.
Typically, clocks are adjusted forward one hour at the start of spring
and then adjusted backward in autumn. When enabled, the device
switches to DST at 2:00 a.m. from the second Sunday in March, and
reverts to standard time at 2:00 a.m. on the first Sunday of November.
■
Use NTP Server — The system clock is set by dynamically polling a
time server.
■
IP Address — IP address of an time server (NTP or SNTP). Note that
up to three servers may be specified through the command line
interface.
■
Polling Interval — Interval between time synchronization
requests. The range for this field is 16-16384 seconds, and the
default is 16 seconds.
■
Last Successful SNTP Connection — Displays the last time the
switch’s clock was successfully updated by a time server.
■
Update Now — Submits a time synchronization request to the
configured time server.
■
Configure Date and Time Manually — Manually sets the date and
time used by the switch. This option may be used if there is no time
server on your network, or if you need the switch to use a
non-standard date or time.
■
Month — Sets the month. The field range is 1-12 .
■
Day — Sets the day. The field range is 1-31 .
■
Year — Sets the year. The field range is 2000-2037 .
■
Hours — Sets the hour. The field range is 0-23 .
■
Min — Sets the minutes. The field range is 0-59 .
■
Sec — Sets the seconds. The field range is 0-59 .
2 Define the fields.
3 Click . The settings are saved, and the device is updated.