3Com 3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE Switch, User Manual

Page: 129 / 256

129
Modifying LACP Aggregated links can be set up manually or automatically established by
enabling LACP on the relevant links. Aggregate ports can be linked into
link-aggregation port-groups. The
LACP Modify Page contains fields for
modifying LACP system and port priority for LAGs.
Monitor users have no access to this page.
To modify LACP for LAGs:
1 Click Port > LACP > Modify . The LACP Modify Page opens:
Figure 66 LACP Modify Page
The LACP Modify Page contains the following fields:
■
LACP System Priority — Specifies system priority value. Ports must
be configured with the same system priority to join the same LAG. The
default value is
32768 . The field range is 0-65535 .
■
Select Port — Selects the port number to which timeout and priority
values are assigned.
■
LACP Port Priority — Specifies the LACP priority value for the port.
If an active port link goes down, the backup port with the highest
priority is selected to replace the downed link. However, if two or
more ports have the same LACP port priority, the port with the lowest
physical port number will be selected as the backup port. The default
is
32768 . The field range is 0-65535 .
2 Define the fields.