Using the Configuration Management Menu
81
The Equipment List displays the following information for each installed module:
Slot
—Slot number. This is a reference number for the ports on the motherboard.
This number corresponds to the number on the List Card menu. (See Figure 51,
later in this chapter.)
Card type
—The card type: Shelf, MCPU, CTX, T1/E1 UNI (4), OC3/STM-1 UNI,
SIM, Ethernet, or CBR T-1DSX, or CBR E1.
PART#-idprom
—The part number as programmed at the factory.
PART#-oem
—The part number for OEM customers.
Serial #
—The serial number for the card. This is the same for all ports on the
motherboard. The optional CBR module has a separate serial number.
Rev #
—The revision number for the card. This is the same for all ports on the
motherboard, as they come already installed in the unit. The optional CBR module
has a separate revision number.
Using the
Configuration
Management Menu
Select
[2] Configuration Management
from the Main menu to display the
Configuration Management menu, shown in Figure 50. Use this menu to access
submenus and screens that allow you to:
n
Manage cards
—View shelf configuration information and configure the
PathBuilder S330/S310 CPU, CTX, ports, CBR module, and Voice Compression
module.
n
Manage circuits
—List, add, modify, and delete virtual circuits.
n
Manage the bridge
—Set the bridge aging timer and configure the bridge.
n
Manage the video dial feature
—View the call routing table, manually start
and end video dial-up sessions.
Figure 50
Configuration Management Menu