manualshive.com logo in svg

3Com 3C63311 - SuperStack II PathBuilder S310 Bridge/router, Reference Manual, Page: 178 / 262

Share
Download
3Com 3C63311 - SuperStack II PathBuilder S310 Bridge/router Reference Manual Download Page 178

166

C

HAPTER

 5: P

ATH

B

UILDER

 S330 D

IAGNOSTICS

 

AND

 P

ERFORMANCE

 S

TATISTICS

2

Select 

[1] Display Current Alarms

 to view a list of current alarms, as shown in 

Figure 134.

Figure 134   

Sample Current Alarm Display

To determine whether or not an alarm-generating condition has been resolved, 
clear the current alarms and recheck the Display Current Alarms screen, as follows:

1

From the Display Current Alarm screen, press [Esc] to return to the Fault 
Management menu.

2

Select 

[2] Clear Current Alarms

.

3

Enter 

y

 in response to the confirmation prompt to clear the current alarms.

4

Select 

[1] Display Current Alarms

 to return to the Display Current Alarms screen.

n

Alarm-generating conditions that are still present will regenerate alarms on the 
Display Current Alarms screen.

n

Alarm-generating conditions that are no longer present will no longer generate 
alarms on the Current Alarm screen.

PathBuilder S330/S310

Alarm Messages

This section lists the alarm messages, meanings of the alarm messages, and 
troubleshooting tips for the major errors reported from each of the PathBuilder 
S330/S310 interfaces. It contains the following subsections:

n

MCPU and CTX Module (System) Alarms

n

Alarms Common to Several Interfaces

n

DS1/E1 UNI Module Alarms

n

DSX-1/E1 CBR Module Alarms

n

SIM Alarms

n

Voice Compression Module Alarms

Summary of Contents for 3C63311 - SuperStack II PathBuilder S310 Bridge/router







































































































































































































































































Reviews:

No comments