94
C
HAPTER
4: C
ONFIGURING
P
ATH
B
UILDER
S330/S310 M
ODULES
, P
ORTS
,
AND
A
PPLICATIONS
Figure 63
Add Group Menu (Adding UNI Group)
6
Select
[1] Set Admin. Port(s)
. The following prompt appears at the bottom of the
screen:
Enter Admin Port(s):
7
Enter the port numbers for the T1/E1 port you want to include in the UNI group.
8
Select
[2] Set Admin. Status
and enter
2
to put the group in service.
9
Select
[3] Previous Menu
.
10
If desired, repeat steps 5-8 to set up a second UNI group and put it into service.
Adding IMA Groups
1
From the Configuration Management menu, select
[1] Manage Card
to display the
List Card menu, shown earlier in Figure 51.
2
From the List Card menu, select
[3] DS1 UNI
to open the T1 (DS1) UNI or E1 UNI
Configuration menu, shown earlier in Figure 58.
3
From the T1 (DS1) UNI or E1 UNI Configuration menu, select
[3] Group
Configuration
to display the Group menu, shown in Figure 64.