Performing Initial System Configuration
67
The IP address does not take effect until you apply your changes by selecting
[2] Apply IP Configuration Changes
from the Local Host IP Configuration menu
(step 5 above).
Configuring Trap Clients
Trap clients are the network management stations to which you want the
PathBuilder S330/S310 to send traps. You can specify up to four trap clients. To
configure trap clients, follow these steps:
1
From the Manage IP Network Configuration menu, select
[2] Trap Client
Configuration
to display the Trap Client Configuration menu, shown in Figure 39.
Figure 39
Trap Client Configuration Menu
2
Select the number corresponding to the trap client you want to configure.
Figure 40 shows the menu for configuring trap client 1.
Figure 40
Trap Client 1 Configuration Menu