3Com 3105 ATTENDANT CONSOLE Manual Download Page 67

Page: 67 / 92

CAUTION:

ACD Group calls routed to a call coverage point always go to the point

configured for the ACD Group, not to the point configured for (or by) the ACD Group

member (that is, the member’s personal call coverage point).

If the member has Do Not Disturb enabled, personal (non-ACD Group) calls go to the

call coverage point. However, ACD Group calls always ring on a member’s phone,

regardless of the Do Not Disturb setting.

If your telephone is part of a bridged extension, see ACD Groups and Bridged Line

Calls for additional information.

Logging In to an ACD Group

When your administrator gives you your ACD group membership information, you can

groups). You must be logged in to an ACD group to receive calls for that group.

Before you can log in to an ACD group, you must be logged in to the VCX system,

which requires password authentication. See the overview section for your telephone in

this guide.

You log in to an ACD group by entering the feature code followed by ACD group number.

If you are already logged in, entering the same feature code and ACD group number

logs you out. You can also log in to and log out of an ACD group through the VCX User

Interface (see

Viewing ACD Group Membership and Status

To log in to an ACD group using a feature code:

1 Press

F 6 + 971

The Display Panel shows a prompt requesting an ACD group number.

2 Enter the ACD group number, then press

The Display Panel indicates that your ACD group login status has changed.

Alternatively, you can combine steps 1 and 2 by entering the following single command:

*971*<ACD group number>

You can display all the ACD groups you are currently logged in to by pressing

6 + 973

(see

Viewing ACD Group Membership and Status

)

ACD Group Interaction with Other Features

This section describes how participation in an ACD group interacts with other VCX

telephone features. Note the following considerations:

An ACD group member that is logged into an ACD group and then initiates a malicious

call trace on a call, is immediately logged off of all ACD groups that he/she belongs to.

All directly-dialed internal calls can still be accepted by that member.

With an ACD group, the VCX User Interface Selective Ringing feature allows you to

change the default ring tone to one of 27 ring tones, delay the ring for a specified

number of seconds, or silence the ringer and only allow the telephone to flash.

Summary of Contents for 3105 ATTENDANT CONSOLE





























































































Search results

Summary of Contents for 3105 ATTENDANT CONSOLE

Reviews:

Related manuals for 3105 ATTENDANT CONSOLE

Brands by name

Popular brands

3Com 3105 ATTENDANT CONSOLE, Manual

Search results

Summary of Contents for 3105 ATTENDANT CONSOLE

Reviews:

Related manuals for 3105 ATTENDANT CONSOLE

Brands by name

Popular brands