3Com 3105 ATTENDANT CONSOLE Manual Download Page 47

Page: 47 / 92

1 Log out of your own telephone.

If your administrator has enabled the Multiple Contacts feature for your extension, you

do not have to log out of one telephone before logging into another.

2 From the telephone that you want to use as yours, enter your original telephone

number.

Forwarding Calls to Voice Mail

You can forward incoming calls to your voice mailbox by using the

Fwd Mail

button.

Alternatively, you forward calls to your mailbox by using a feature code.

When you forward incoming calls to your voice mailbox:

An incoming call rings once on your telephone and is then sent to your voice mailbox.

If you are logged in to multiple phones, each using the same telephone number, and

one of the phones enables forward to voice mail, the feature applies to all phones an

incoming call rings once on all of the phones and is then sent to your voice mailbox.

If you enable forward to voice mail while one or more calls are ringing, whether you

are on-hook or off-hook, the pending calls are sent to your voice mailbox and

forward to voice mail is enabled for all subsequent calls.

If you are a Hunt Group member, personal (non-Hunt Group) calls go to your voice

mailbox. However, Hunt Group calls always ring on a member’s phone, regardless

of your personal telephone setting.

To forward incoming calls to your voice mailbox for a 3502/3503 Telephone:

Press

Fwd Mail

. The white light next to the button comes on. All future calls are sent

to your voice mailbox.

If forward to voice mail is not enabled, you can send a call that is ringing (and all

subsequent calls) to your voice mailbox by pressing

Fwd Mail.

To disable this feature, press

Fwd Mail

again. The light goes out and calls ring

normally.

To forward incoming calls to your voice mailbox for a 3500/3500B/3501 telephone:

Press

Feature

440.

All future calls transfer automatically to your voice mailbox.

If you have not enabled this feature code, you can send a call that is ringing (and all

subsequent calls) to your voice mailbox by pressing

Feature

440.

To disable this feature, press

Feature

440.

All calls ring normally.

Transferring a Call to Another User’s Voice Mail

You can transfer a connected call directly to another subscriber’s voice mail rather than

that subscriber’s telephone extension. The subscriber can be located locally or at a

remote site.

To transfer a call to another subscriber’s voice mail:

1 While on a call, press

Feature

441.

The Display Panel shows the following prompt:

Transfer VMail Number:

Summary of Contents for 3105 ATTENDANT CONSOLE





























































































Search results

Summary of Contents for 3105 ATTENDANT CONSOLE

Reviews:

Related manuals for 3105 ATTENDANT CONSOLE

Brands by name

Popular brands

3Com 3105 ATTENDANT CONSOLE, Manual

Search results

Summary of Contents for 3105 ATTENDANT CONSOLE

Reviews:

Related manuals for 3105 ATTENDANT CONSOLE

Brands by name

Popular brands