26
C
HAPTER
3: B
ASIC
T
ELEPHONE
O
PERATION
To change the ringing tone:
1
Log out of the telephone; press
P 5 + 6
.
2
Press
P 5 + 9
.
The Display Panel shows which ringing tone the telephone uses, for
example:
Alert Tone 1- 10:
7
3
Use the middle soft key under the Display Panel to delete the current
ringing tone number.
4
Enter a new tone number between 1 and 10 and then press the # key.
5
Log in to the telephone; press
P 5 + 6
and then enter the
telephone’s password.
You will hear a new ringing tone the next time you receive a call.
Using the Hands
Free Feature
You can use your telephone as an intercom. You can answer
internal
(intercom) calls without picking up the handset. When you receive an
internal call, your telephone sounds a tone and activates the speaker
phone.
You cannot use this feature with external calls (a call from outside your
local call processor) or Anonymous (blocked caller ID) calls. These calls
ring to your telephone as usual.
You can enable and disable Hands Free by using Feature Code 100. See
Feature Codes
.
Putting a Call
on Hold
To put a call on hold:
1
While you are on a call, press the
Hold
button.
This Display Panel shows:
Hold
2
To return to the call, press the
Hold
button again or press the appropriate
Access
button.
Summary of Contents for 3101
Page 6: ...6...
Page 12: ...12 CHAPTER 1 GETTING STARTED...
