Answering a Call
21
Changing Your
Password
You must use the Telephone User Interface (TUI) and change the local
password to match the password stored on the call processor by
following these steps:
1
Press
Program
+
5
+
5
or press
Feature 410
+
5
+
5
.
The Display Panel shows:
Enter Password:
2
Enter your new password and press
#
. The first digit of the password
cannot be zero (0). The minimum password length is 4 digits; the
maximum password length is 9 digits.
Answering a Call
To answer an incoming call, lift the handset.
Alternatively, if you are using a 3Com 3101SP Basic Telephone, you can
press the speaker button.
If your telephone includes multiple access lines, press the Access button
for the line on which the new call is arriving (the light next to the button
will be flashing).
Unanswered calls are sent to either your call coverage point which, by
default, is your voice mailbox or your configured call forwarding
destination. See
Call Forwarding
.
Answering a
Second Call
When a new call arrives while you are on a call:
1
Press
Hold
to put the current call on hold.
2
Press the Access button for the line whose status light is blinking,
indicating a new call.
3
To return to the earlier call, hang up the new call, or put it on hold, or
transfer it, and then press the Access button for the original call.
Making Calls
This section describes standard dialing features.
Summary of Contents for 3101
Page 6: ...6...
Page 12: ...12 CHAPTER 1 GETTING STARTED...
