360 Vision Invictus Hybrid, Installation And Configuration Manual

Page: 47 / 49

Only available on Multimedia Edge Recording Predator
The role of the recording function is to store video streams as files on a storage device built into the camera. The
recording function can auto-detect the necessary parameters from each configured stream, such as video
compression, resolution, frame rate and bitrate. The size of the video created will depend on the video compression
and the bit rate used.
Different options can be used to start a recording per stream, these are manual, continues, external alarm, network
loss, attack detect and schedule. Each recording can be configured with different options including recording
duration.
The recorded file name will be displayed as YYYYMMDDhhmmss-x-name.avi (x indicated the recording trigger d is
manual demand, a is attack detect and s is schedule)

Camera – Cannot be edited, shows label/name given to the camera.
(See Video – Camera – Page 36)

Stream 1, 2 or snapshot- Choose option to configure.

Name – Type in name of the file name to be used.

Split files – Set size of recording by file size or time period.

Thumbnail – If enabled before the recording, thumbnails can be then used as a filter in the
Recording browser.
(See Multimedia page
56
)

Start/Stop – Demand a manual recording- use the start and stop to set.

Continuous – Enable continues recording.

External Alarm – Trigger recording from an external string.

Network loss - Trigger recording from a network connection loss to the camera.

At preset – Start recording when the camera gets to a specific preset, tour or mimic.

Attack Detect – Start recording if the camera is attacked

Schedule Edit – Setup a recording schedule (See below)

Lifetime – Recording schedule will stop after this period.
22 . Recording and Recording Browser
V12_1_129_03 Page 47 of 49
© 360 Vision Technology Ltd