360 Vision Invictus Hybrid, Installation And Configuration Manual

Page: 33 / 49

PTZ position co-ordinated are also shown, use the refresh button to refresh the data if the camera has been moved.
PTZ position co-ordinated can also be added manually, use the go button to send the camera to the co-ordinated
set.
Pan!Tilt Offset
Used to set current pan/tilt to zero.
OK to program the new settings into the lnvictus Hybrid.
Cancel to abandon the changed to the advanced feature settings.
12.2.4 Camera
• Camera -cannot be edited, shows label/name given to the camera. (See section Video - Camera page 28)
The Camera page, offers options to:-
• Digital Zoom -Enable digital zoom. Default is off.
• White Balance -Select White Balance settings to suit camera location.
(See page 45 for table of options)
• Wide dynamic range -Enable SBR, Options available are ON, Auto and off. Default is Auto.
• Zoom Speed - Select zoom speed of the lens. Options are slow, medium, high and highest.
• Proportional Zoom -Automatically reduces/Increases pan/tilt speed depending zoom ratio. Default is
on.
• Freeze Preset -This option freezes the image, when moving between preset. This can help reduce the
bandwidth. Default is on.
• Day Aperture - Can be used to increase the picture detail. Default is 10.
• Sensor Frame Rate -Can be used to set the camera to suit 25 fps (PAL) or 30 fps (NTSC). Unit must
be rebooted for settings to apply. Default is PAL.
• Auto Focus/Iris on PTZ -Auto focus / iris will activate when PTZ is used, can be switched off. Default is
on.
• Fast Shutter- Select fast shutter if using the lnvictus Hybrid camera on an ANPR system. Default is off.
(See page 45 for table of options)
• Set - Set current position to zero
• C lear - C lear current zero position.
V12_1_129_03 Page 33 of 49
© 360 Vision Technology Ltd