2Wire i38HG User Manual Download Page 56

Page: 56 / 108

iNID User Guide

Select the application you want to delete, click

Delete

Allowing all Applications (DMZplus)

DMZplus is a special firewall mode that is used for hosting applications. When in the DMZplus mode, the
designated computer:

•

Appears as if it is directly connected to the Internet.

•

Has all unassigned TCP and UDP ports opened and pointed to it.

•

Can receive unsolicited network traffic from the Internet.

Open a Web browser and enter

http://gateway.2Wire.net

to access the 2Wire i3802V user interface.

Click

on the

Home

page; the

Firewall Status

page opens.

Select

Applications, Pinholes and DMZ

; a page opens showing hosted applications.

Note:

The application you created will not appear here if it has been added

to the Hosted Applications. Return to the previous page, select the
application intended for modification, click

Remove

to return the application

to the available application list.

Note:

Be sure to select the intended application. Once you click

Delete

, the

application is deleted.

Caution:

Use the DMZplus mode with caution! A computer in the DMZplus

mode is less secure because all available ports are open and all incoming
Internet traffic is directed to this computer.

Summary of Contents for i38HG













































































































Search results

Summary of Contents for i38HG

Reviews:

Related manuals for i38HG

Brands by name

Popular brands

2Wire i38HG, User Manual

Search results

Summary of Contents for i38HG

Reviews:

Related manuals for i38HG

Brands by name

Popular brands