2Wire Gateway None User Manual Download

Page: 68 / 139

Management and Diagnostic Console

Hardware Version

2Wire gateway hardware version.

Hardware Options

The type of peripheral device installed.

DSL Modem Type

ADSL or ISDN.

Current Software

2Wire gateway software version.

Configuration

Key Code

The key code associated with the current
provisioning settings. The value is
Unprovisioned if the 2Wire gateway has not yet
been provisioned.

System Time

The day, month, year, and time; or “Retrieving
date and time settings from Internet” if not set.

Time Since Last Boot

The time elapsed since the 2Wire gateway was
last restarted.

Last ID Post

The time elapsed since the 2Wire gateway
communicated with the configuration server.

Components

DSL Modem

DSL modem software version.

Firewall Rules

Current version of the installed firewall rules
database.

Application List

Current version of the application list.

Note:

The contents of the Components list varies according to service provider-specific

information. For example, the Components list may contain language files (such as
common_en, common_es, or common_fr); user interface files (such as base_ui); or VoIP files
(such as base_voice).

Item

Description

Summary of Contents for Gateway None












































































































































Search results

Summary of Contents for Gateway None

Reviews:

Related manuals for Gateway None

Brands by name

Popular brands

2Wire Gateway None, User Manual

Search results

Summary of Contents for Gateway None

Reviews:

Related manuals for Gateway None

Brands by name

Popular brands