2Wire Gateway None User Manual Download

Page: 12 / 139

System Tab

Optional:

In the Enter Your Hint field, enter a hint.

A hint is a word, phrase, or question that reminds you what the password is. There is an I forgot the
password link on the password entry page. When you click this link, it shows you your hint and allows
you to enter your password.

Click

SAVE

To disable password protection, deselect the

Enable

checkbox and click

SAVE

To safeguard your network against unauthorized users, it is also a good practice to periodically change your
password.

Resetting the System Password

If you forget your password and still cannot remember it
after seeing your hint, click the
I still can’t remember the password link.

The Reset System Password page opens.

Figure 4. Reset System Password Page

Summary of Contents for Gateway None












































































































































Search results

Summary of Contents for Gateway None

Reviews:

Related manuals for Gateway None

Brands by name

Popular brands

2Wire Gateway None, User Manual

Search results

Summary of Contents for Gateway None

Reviews:

Related manuals for Gateway None

Brands by name

Popular brands