12
13
2VV.
Creating innovative solutions for you and your business since 1995.
C) Preparing the unit
The design version may require to remove the side covers.
You will need a no. 3 Allen wrench.
Move the cover upwards to remove it. It is secured by auxiliary brackets
(see following picture).
Removed cover with brackets
6. INSTALLATION
•
Hang the unit from the rods and secure the holes in the
wall appropriately.
•
Inspect all mounting brakets and screws
•
Install protection grilles on the outside of the wall to pre-
vent the ingress of water and larger objects.
(not included)
