22
23
2VV.
Creating innovative solutions for you and your business since 1995.
6. INSTALLATION
ELECTRIC INSTALLATION AND WIRING
CAUTION!
•
The main power supply must be turned off before working on the internal parts of the unit.
•
The electrical installation must be done pursuant to the technical documentation and by a certified electrician. The
unit installation should be done by a qualified technition with experience in electrical applications. The manual must
observed, together with the laws and regulations applicable in the country.
•
The wiring diagrams located on the product have a higher priority than those in manual. Before the installation,
check that the indication of the terminals corresponds to the wiring connection diagram. In case of doubt, contact
the supplier and do not connect the unit under any circumstances.
•
The unit must be connected to the main power source via isolated cable with a heat resistance in compliance with
the diameter and the applicable laws and regulations of the country where the unit is installed.
•
Any altering or changes to the internal connections of the unit are forbidden and may result in the loss of warranty.
•
Only the use of original components guarantees the correct function of the unit.
Product designation
Serial number
•
U = Voltage
•
f = Frequency
•
n = Speed
•
ph = Phase
•
av = Air output
•
I = Total current
•
P = Output
•
m = weight
•
IP = IP cover
•
ver = designation for
pro-
ducer
(Fig. 1) Location of unit label and explaination of abbreviations .
