manualshive.com logo in svg

2VV ALFA 85, Installation Manual

Share
Download
2VV ALFA 85 Installation Manual Download Page 43

43

2VV.

 Creating innovative solutions for you and your business since 1995.

Replacing the main control board

Replacement procedure:

1. Disconnect all the cables from the electronic board.

2. Unscrew the four plastic screws fixing the electronic

-

board.

3. Remove the electronics board.

4. Place the new board and screw it on.

5. Connect back all the cables. Follow the numerical iden

-

tification!

6. It is necessary to load the new firmware corresponding 

to the unit model to the electronics board! For further 

help contact aftersales department.

9. FAULTS REMOVAL

Replacing the water / CO / DX coil

Replacement procedure:

1. Dissconnect the pipe connection to the exchanger.

2. Unscrew the bolts on the panel.

3.  Dissconnect  the  connector  of  the  temperature  sen

-

sor(s)!

4. Then pull the whole coil out of the unit.

5. Place the new coil to the unit. Connect the connector of 

the temperature sensor(s)!

6. Screw on the bolts fixing the panel.

Replacing the electric heater

Replacement procedure:

1. Dissconnect the connector on the electric heater 

2. Unscrew the screws fixing the electric heater.

3. Remove the electric heater module from the unit.

4. Place the new electric heater module to the unit.

5. Screw on the heater and connect the cable back.

Summary of Contents for ALFA 85























































Reviews:

No comments

Brands by name

Popular brands

Load more brands