2T Technology Voyager Voice Sleek Installation & User Manual Download Page 2

Page: 2 / 28

Contents

Before Installation .................................................................................... 3

Pillar or Wall Mounting the Intercom ...................................................... 4

Wiring of the Intercom ............................................................................. 5

Powering Up ............................................................................................. 6

Getting The Intercom Setup App .............................................................. 9

Starting with The App ........................................................................ 10

Setting Call In and Call Out Phone Numbers ..................................... 11

Using The Intercom ............................................................................ 12

Out Of Hours Setup (Do Not Disturb)................................................ 13

Keypad Codes ..................................................................................... 14

Automatic Schedules .......................................................................... 15

Configure Input 1 and Input 2 for Open & Close Status. ....................... 16

Set Ring and Talk Time for Outgoing Calls ........................................... 17

Force the Intercom to Operate on 3G only. ............................................ 17

Options for Security Settings .................................................................. 18

Program the Control Phone. ................................................................... 18

Diagnostics ............................................................................................. 19

RED LED - System Health Status Indicator .......................................... 21

Trouble Shooting Guide ......................................................................... 22

Summary of Contents for Voyager Voice Sleek





























Search results

Summary of Contents for Voyager Voice Sleek

Reviews:

Related manuals for Voyager Voice Sleek

Brands by name

Popular brands

2T Technology Voyager Voice Sleek, Installation & User Manual

Search results

Summary of Contents for Voyager Voice Sleek

Reviews:

Related manuals for Voyager Voice Sleek

Brands by name

Popular brands