4
Power
A)
Please use the power supply provided with the device
B)
Please place the power supply within a meter or two of the device.
Long runs of narrow cable will cause problems.
C)
For longer runs of power cable between the power supply and the
device
Up to 2 meters - Use minimum 0.5mm
2
(20 gauge)
Up to 4 meters - Use minimum 0.75mm
2
(18 gauge)
Up to 8 meters - Use minimum 1.0mm
2
(16 gauge)
Pillar or Wall Mounting the Intercom
Pillar or wall
Mounting
Intercom
Power unit
in box
Antenna
Mounted above the height
of the wall or pillar
1.
Unscrew the top two screws from the body of the intercom.
There are four security screws holding the front panel to the body of the
intercom. The tool for opening these screws is in the box. Please leave
the plastic protection on the Intercom body until your installation is
complete to protect the surface from scratches.
2.
Use the body (rear part) of the intercom to mark the wall or
pillar for mounting the intercom.
There are four screw holes for
mounting the intercom to the wall.
3.
Decide how to run the power supply cable and the antenna
cable,
as these must enter the intercom through the biggest hole in the
back of the Intercom body.
4.
Mount the intercom to the wall.
**Keep the Antenna
at least 1 meter from
the Intercom and at
least 1 meter from
the Power unit. Keep
the power unit at
least 0.5 meter from
the Intercom.
