11
Setting Call In and Call Out Phone Numbers
Setup for Incoming Calls
The GSM unit defaults to open access. With no programmed Open
Telephone numbers any caller can open the gate or door. The GSM
device sees the incoming call and hangs up the call. The GSM unit will
pulse the Relay. This is a no cost call.
** Use I button for info on this screen
Programming open phone numbers with this
screen in the App creates a white list where
only programmed Open phone number have
access to open gates or doors.
This screen allows ten phone numbers to be
programmed at a time. Use the last 10 digits
from any telephone number, ignoring any
international codes.
Any programmed Open number can pulse
Output 1 or Output 2 (Possibly: Main gate or
Side gate)
Setup for Outgoing Calls
Programming Phone Numbers into the
GSM device.
Now program the phone list, with the phone
numbers that the GSM device will dial once
the intercom button is pressed. For initial
testing this is best if it’s your own number. It
can be changed later using the same screen.
International codes are not required unless the
intention is to call a phone number originating
in another country.
