12
Using The Intercom
With at least one ‘Call Out’ Phone number programmed, the device can
be tested to place a call to this programmed phone number.
Place the first Outgoing Call
To test calling operation and audio quality you will need a second person
either at the intercom or at the mobile phone.
Move the mobile phone away from the intercom.
Press the intercom button to place a call from the GSM device.
The GSM device will call the number at location for phone 1.
Answer the call and test that audio can be heard by speaking
normally at both ends.
On the mobile Phone, press
1 or 2 (to trigger Output 1 or 2) to
grant access
(this will pulse the relay).
For a user who
doesn’t want to grant access terminate the call
with #.
When the end user is called by the GSM device, just hanging up
the phone isn’t sufficient. If further numbers are programmed
then these will be called in a follow on call. When not granting
access, terminate the call by pressing #.
