18
** For these text commands to become active the device must be power
cycled or the text command
Reset
can be sent to the device to restart it.
Options for Security Settings
A security code can be enabled for this device. Once enabled every text
message must have the security code at the end of the text command.
The code can also be changed to one of your preference.
Text to Send
Response
Result
Code on 8531
Security Code On
Now every command
sent must be followed
by the current code.
Code off 8531
Security Code Off
Code is off
Change XXXX YYYY
Security code
changed
XXXX = New Security
Code
YYYY = old security
code
Program the Control Phone.
The Control phone can be programmed to allow someone other than the
person programmed as phone 1 to receive important messages from the
system. This may be necessary should the installer have responsibility
for maintaining the system.
Text to Send
Response
Result
Control Phone 08XXXX Control Phone 08XXX
programmed
Control Phone
now set.
Send Control Phone
Control Phone 08XXX
This is how we
check if control
phone is set
