7
2. Apply power to the GSM unit.
The device will ask you to wait.
Initially the Register light will be on constant and as the unit registers on
the network, will start to flash every 1 second.
3. Give the Unit about 2 minutes to register when first turned on.
When the Signal Strength light is on constantly or flashing the unit has
signal from the network. If the signal strength light fails to light at all
you may have to change the position of the device to pick up a GSM
signal. Raise the antenna to the highest position possible. It may also be
an option to use a SIM from a different network. On some occasions it
may be necessary to use a high gain antenna, please contact your supplier
for this.
Signal Strength
Power
Network Register
Status
Antenna
Mobile Network Signal Strength.
1. On Steady: Strong Signal
2. Flashing: Acceptable Signal.
3. Off: No Signal.
Network Register Status.
1. Off or On Constantly =
NOT Registered
2. Flashing every second =
Registered.
4. Wait for Beep-Beep
After between 30 and 60 seconds you will hear the GSM unit go Beep-
Beep.
After you hear Beep-Beep the unit is ready for programming and
operation.
5. Program the units own phone number into the device.
For the operation of the Keypad, Timers (scheduled events) and the Log
the unit needs to know the correct time of day. It gets this from received
SMS Text messages.
