45
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Access Authorisation According to IP Addresses
These commands are used for setting 5 IP addresses authorised for access to this
terminal. Connections coming from other IP addresses will be ignored.
at^sccfg="auth_ip",1
Switch on / off access authorisation according to IP addresses.
at^scipauth="add","54.182.153.21"
Enter the command to add an IP address to the list end. When the maximum
count of addresses in the list is reached, the command will be rejected.
at^scipauth="remove",1-5
Enter the command to remove an IP address from the list. Select the position
using parameters 1 to 5.
at^scipauth="clear"
Enter the command to delete all IP addresses from the list.
at^scipauth?
Enter the command to write out the list of set IP addresses.
SCIPAUTH: 1> "90.182.112.54"
SCIPAUTH: 2> "90.182.112.5"
at^scipauth=?
Enter the command to display the setting options for the interface.
SCIPAUTH: "ADD","15"
SCIPAUTH: "REMOVE",1-5
SCIPAUTH: "CLEAR"
Test Command
This command is used for terminal testing. Enter this command to monitor the terminal
state for provider's or
Server connection troubleshooting purposes,
2N SmartCOM
®
for example.
at^sctest
Enter the command to test the basic functions of the terminal: GSM module login
to the provider's network, GPRS data connection operability and
2N SmartCOM
®
Server connection, for example. You will get the following reply, for example:
at^sctest
