2N TELEKOMUNIKACE a.s., www.2n.cz
65/92
Now the
is ready for use. Click the shortcut item on the
2N LiftIP
®
Service Tool
desktop (see the figure below) or select the Start item to start the application.
Icon of
2N LiftIP
®
Service Tool
After the application launch, the splashscreen gets displayed to inform you of the
application manufacturer and current version. After the launch, you will see the basic
screen and
menu. Here an offline table of parameters can
Configuration / Parameters
be prepared for you to export the data. Click
to get connected to the
Connect device
CU and move to the
menu. A login window will be displayed where
Connect to device
you enter the IP address if available. At the same time, set the communication port if
changed and enter the valid password. Click Connect to get connected to
and read the configuration. Select Remember password to save the
2N LiftIP
®
password to be able to establish immediate connection to the device whenever you
open the application. To use the
for multiple unit
2N LiftIP Service Tool
®
administration, click on extended settings. The
will be displayed where
Connection list
you can create and name connections. In this case, do not use the default connection
for connecting of new and unknown units. Create new records into the structure for
permanent connections.
Application Window
