2N TELEKOMUNIKACE a.s., www.2n.cz
18/92
2.3 Mounting
Safety Precautions
Caution
Make sure that the position, appearance and marking of the
communicator controls (ALARM button, e.g.) are in accordance with the
applicable lift standards.
Before You Start
Installation Conditions
Make sure that the lift panel is ready for installation, including speaker
perforation.
Make sure that the panel includes the required elements:
ALARM button;
illuminated pictogram
;
Request received
illuminated pictogram
.
Connection established
Make sure that the positions of these pictograms are in accordance with the
applicable regulations.
Make sure that there is a free space of 65 (W) x 130 (H) x 25 (D) mm at least
behind the panel.
2N ® LiftIP Position
2N
®
LiftIP
can be mounted in any position as required. The optimum position for
is approximately on the level of an adult‘s mouth. Install
on a
2N LiftIP
®
2N LiftIP
®
place where any contact of the operating personnel with the device is eliminated
(refer to Safety Precautions).
Caution
Installing electronics without the mounting panel is not recommended as
the panel is used as electric insulation and the manufacturer cannot
guarantee safety if the panel is not used.
