manualshive.com logo in svg

2N LiftIP, User Manual

Share
Download
2N LiftIP User Manual Download Page 17

2N TELEKOMUNIKACE a.s., www.2n.cz

17/92

2.2 Before You Start

Product Completeness Check – Universal Design

Check before installation whether the product package includes the following:

motherboard,

4 terminals (line, ALARM, CANCEL, pictograms) slid to the left,

6 jumpers (2 x 3) inserted on the jumper link for ALARM and CANCEL setting,

speaker and microphone (plus an additional cable microphone if required by the 
client),

Brief manual (printed) and Warranty card,

Download the Service Tool from 

.

www.2n.cz

2N ® LiftIP Installation Conditions

2N  LiftIP

®

 is not intended for outdoor applications.

The product is connected to the LAN.

The covering against mechanical damage, water, dust and other influences must 
be provided by the installing company if necessary.

The  communicator  mounting  surface  must  be  perfectly  flat,  for  details  see 
Section 

.

2.3 Mounting

Tip

The green Ethernet port LED starts flashing on LiftIP to indicate that the 
LAN and power supply/PoE have been connected.

Once connected, LiftIP gets the IP address from the DHCP server.

The  Service  Tool  is  equipped  with  a  scan  function  that  finds  the  LiftIP 
products in the LAN.

Universal Design

Make sure that the lift panel is ready for 

 mounting.

2N  LiftIP

®

Summary of Contents for LiftIP





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands