E. Settings
Model AQSync Air Quality Monitoring Station Manual Rev. A-1
32
It is recommended that users
regularly check for updates, as 2B
Technologies is continually working to
upgrade
features
and
improve
performance of the AQSync. To
avoid prohibitive cellular costs, it is
recommended that these updates be
carried out only wh
en the “WiFi only”
upload setting is in use. This is set in
the “Upload Settings” screen as
described below).
E.7.2
Static IP
Remote operation can be accomplished via a Modbus interface. This feature is currently
under development for the AQSync.
The “Static IP” screen allows you to choose a set/unchanging (static) IP address for
your instrument, provided that you know the correct DNS and router for your network.
Although most users don't need static IP addresses, they normally matter more when
external devices or websites need to remember your IP address. Click on the address
areas and enter your Static IP/Router/DNS values in the screens that pop up. Press
“Apply” when ready in each case, and then “Save” when you return to the Static IP
screen.
Warning
: The static IP must be set to a valid IP address and not an IP address which is
already assigned to another networked device, or it could cause errors/instrument
failure. If you need assistance with this setting, consult your system administrator or
contact 2B Technologies’ Technical Support.
E.7.3
Modbus Server
Remote operation of the AQSync makes it possible for the user to adjust the parameters
of the AQSync during runtime without being co-located with the instrument.
