- 23 -
2.
Determine which toolbar buttons will be visible on the Zignature Pad and which will
be hidden. By default, the
“Browse Commercials”
button is hidden.
3.
Click
Apply
.
To display the toolbar buttons on the left of the Document Monitor screen rather than at
the top:
1.
In the
Document Monitor
tab, select
Left side toolbar
.
2.
Click
Apply
.
To remove the toolbar altogether:
1.
In the
Document Monitor
tab, disable
Show Toolbars
.
2.
Click
Apply
.
NOTE
: One of the buttons may not be active in the Document Monitor:
. This is the
Custom Actions
button, and 10ZiG can program it according to your request.
Do Not Revert to Advertisements
By default, when you close a document, the 10ZiG logo is shown on the Document Monitor.
To show advertisements on the Document Monitor:
1.
In the
Document Monitor
tab, deselect
Show documents only
.
2.
Click
Apply
.
(Advertisements are always shown on the Zignature Pad.)
Turning off Zignature Pad after Idle Time
You can save electricity and wear on the Zignature Pad. By default, the screen stays bright
even when idle, but if the Zignature Pad is not displaying a document, you can set it to turn
off after a defined number of seconds have elapsed:
1.
In the
VPort Agent
tab, select
Tablet power saver
.
2.
Set the number of seconds of idle time before turning off (default: 60 seconds).
3.
Click
Apply
.
Splitting Large Documents
Large documents may cause the “Negative response...” message to appear or your
document may be displayed incorrectly. To split large documents into two (or more)
documents:
1.
In the
VPrint configuration
tab, specify a number less than 50 in
Max pages per
document
. (The default value of zero means that documents are not split.)
2.
Click
Apply
.
When you close the first document, VPort will automatically send the second one to the
Zignature Pad and display it on the Document Monitor.
Changing Bitmap Display Size
The default settings for displaying documents:
Summary of Contents for ZiGnature Pad 1410
Page 1: ...i...
