Feb 4, 2022
nanobox | lemondrop User Guide v 1.0.10
Copyright 1010music LLC 2022
Page 54 of 58
Parameter
Range
MIDI In
The MIDI Channel that will be used to control fireball.
Signals on other channels will be ignored. Set to Omni
to respond to MIDI signals on all channels.
None, Ch 1 to 16, Omni
- X Mod
The MIDI CC that will be used to control Macro X
modulation source. This is the same Macro X that is
controlled by the top knob on the Dashboard and by
left/right touching on the X/Y Modulation grid.
“None” and “CC000” through “CC127”.
- Y Mod
The MIDI CC that will be used to control Macro Y
modulation source. This is the same Macro Y that is
controlled by the bottom knob on the Dashboard and
by up/down touching on the X/Y Modulation screen.
“None” and “CC000” through “CC127”.
Line Thru
The amount of the signal on the Line Input that is
added to the signal sent through to the FX engine.
0% to 100%
Line Input
When set to Mono, it will only use the signal on the left
channel of the line input. You will get more grains if
you use a Mono input.
Stereo and Mono.