1010music BlueBox User Manual Download Page 5 | Manualshive

Page: 5 / 50

background image

Copyright 1010music LLC 2020

Page 5 of 50

Bluebox User Manual v 1.0.5

Jan 7, 2021

WELCOME

Welcome to the Bluebox User Manual. If you want to get up and running quickly with
bluebox, the

Quick Start Guide

will walk you through basic setup and the primary

features. The Quick Start Guide was included in the package with your bluebox, and you
can find it on our Bluebox Support page at:

1010music.com/blueboxdocs

If you are ready for more detail, you are in the right place. We will go into more detail
about set up options, explain the features available in each of the different modes, and
help you find all the available options. We will cover how to tweak your mix, how to route
your signals to the different outputs and the effects, how to refine your sound using EQ
and FX, and how to record tracks and the main output. We will also review how to play
back the WAV files you have recorded or stored on your microSD card, and how to select
the Active WAV file for each track. Along the way we will see how to save your settings
into different project files, configure the metronome, adjust the tempo and use MIDI
controllers with bluebox.

If you still have questions after reading this manual, join our forum at

forum.1010music.com

. You can specifically get bluebox support at:

https://forum.1010music.com/forum/products/bluebox-compact-digital-mixer-recorder/
support-bluebox

Our support team and other users are out there to help you and to exchange ideas about

how to get the most out of bluebox. Registered forum users can also get the latest
firmware with new features and bug fixes in the downloads section of the forum.
Registration is free, but you will need to provide an email address.

Before you get started, you may want to check for firmware updates for your bluebox.
You can learn how to do that in the

Update Firmware

section near the end of this

document.

«
...
3
4
5
6
7
...
»

Summary of Contents for BlueBox



















































Reviews:

No comments

Related manuals for BlueBox

Brand: MAKINEX Pages: 16

Brand: machine technologies Pages: 30

Brand: Yamaha Pages: 24

AFTERGLOW CHORUS

Brand: TC Electronic Pages: 4

Flashback Mini Delay

Brand: TC Electronic Pages: 27

DIGITAL iPAD/TABLET MIXER iX16

Brand: Behringer Pages: 4

Brand: Tascam Pages: 164

Brand: PuzzleSounds Pages: 15

Brand: Kemar Pages: 62

Brand: Hkoenig Pages: 77

Brand: Crestron Pages: 2

Brand: JVC Pages: 32

Brand: JVC Pages: 50

16-Channel Mixer with DSP MDR1688

Brand: Samson Pages: 2

Brand: Samson Pages: 28

Brand: Samson Pages: 2

Maxi-Mix 1329 Series

Brand: Barnstead International Pages: 8

Brand: M-Audio Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands