Change Settings for a Single Track:
To change settings for a track you will first select a track in TRACK
mode. Then you use the knobs and touch gestures to change the
levels and toggle the states of the settings. You can switch which
bank of controls have the knob focus.
1.
Push TRACK and then touch a track in the meter bridge
to select it. The controls on the bottom half of the screen
are now controlling only the selected track.
2.
Turn the knobs to adjust the four controls within the
pink frame and change the settings for the selected
track. The meter in the lower left displays the main
output level of the current track.
3.
Push A to toggle the knob focus to the other set of
controls, or tap a control panel to give it focus.
4.
Touch and hold a knob on the screen and then drag
your finger to change the value of that knob. Slide your
finger up and down or left and right to adjust the value.
5.
Tap the REC, MUTE or SOLO button to toggle the state
for the current track.
TRACK Mode
You can use this process to:
■ Adjust the volume
■ Adjust the gain
■ Solo a track
■ Mute a track
■ Arm a track for recording
■ Pan a track between left and
right channels
■ Control the sends to FX1 and FX2
for a track
■ Control the sends to the
headphones (CUE) and Out2 for
a track
Copyright 1010music LLC 2020
Page 24 of 50
Jan 7, 2021
Bluebox User Manual v 1.0.5
