Zzipp ZZFMLOW3000, Руководство пользователя

Страница: 7 / 24

ENGLISH
IT
ALIANO
ESP
ANOL
7
INSTRUCTIONS FOR REFILLING OF THE FOG FLUID CANISTER
MAINTENANCE
SPECIFICATIONS
• Fog fluid should be added when the machine shows “ FOG FLUID EMPTY ”
• If needed follow the instructions for “Manual Control” to start up the machine again.
• Repeat the steps if the machine is not working immediately.
• IMPORTANT: Always set the output to Zero and wait for minimum 30 seconds before to
switch off the unit. This allows the unit to execute its cleaning process so all the remaining
fluid is removed from the internal circuits.
• Switch off the unit, unplug the mains cable and wait until the unit has been cooled down.
During inspection the following points should be checked:
• All screws used for installing the device and any of its parts should be tightly fastened and
may not be corroded.
• Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally
free from any deformation.
• The mains cables must be in impeccable condition and should be replaced immediately
when even a small problem is detected.
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!
This unit is radio-interference suppressed. This product meets the requirements of the
current European and national guidelines. Conformity has been established and the relevant
statements and documents have been deposited by the manufacturer.
Mains Input: AC 220-240V, 50/60Hz
Power consumption: 3000 Watt
DMX Channels: 2
Fuse: 15A
Warm up time: 3.5 min
Fog liquid tank: 2.5L
Recommended fog liquid: BT-LOWFOG LIQUID 5L
Optimally usable floor area: 400m2
Water tank: 20 liters
Fog liquid consumption: 1-72 ml/min
Water consumption: 185 ml/min
Dimensions (L x W x H): 785 x 495 x 600 mm
Weight: 52 kg