ZyXEL Communications WAP6804, Руководство пользователя

Страница: 36 / 114

Chapter 6 Repeater Mode
WAP6804 User’s Guide
36
The following table describes the labels shown in the Status screen.
Click this icon to see the Status page. The information in this screen depends on the device mode
you select.
Click this icon to see the Monitor navigation menu.
Click this icon to see the Configuration navigation menu.
Click this icon to see the Maintenance navigation menu.
Table 7 Status Screen Icon Key (Repeater Mode) (continued)
ICON DESCRIPTION
Table 8 Status Screen (Repeater Mode)
LABEL DESCRIPTION
Device Information
Device Name This is the WAP6804’s model name.
Software Version This is the firmware version and the date created.
Device Mode This is the device mode ( Section 3.1.2 on page 22 ) to which the WAP6804 is set - Repeater Mode .
Current Partition This shows which partition the WAP6804 uses. The WAP6804 has two partitions and supports dual
image function.
LAN Information
Eth0 MAC Address This shows the MAC Address of the WAP6804’s first Ethernet LAN port.
Eth1 MAC Address This shows the MAC Address of the WAP6804’s second Ethernet LAN port.
IP Address This shows the LAN port’s IP address.
IP Subnet Mask This shows the LAN port’s subnet mask.
Gateway IP This shows the LAN port’s gateway IP address.
IPv6 Address This shows the LAN port’s IPv6 address.
IPv6 Link Local Address This shows the LAN port’s current IPv6 link-local address.
IPv6 Gateway This shows the LAN port’s gateway IPv6 address.
AP Connection Status
MAC Address This shows the MAC address of the access point to which the WAP6804 is connected.
Name (SSID) This shows the descriptive name of the wireless LAN to which the WAP6804 is connected.
Channel This shows the channel number which you select manually or the WAP6804 automatically scans
and selects.
Authentication This shows the data encryption method the access point uses for the wireless connection.
Status This shows if the WAP6804 is connected or disconnected from an access point.
Wireless Network Information - 5 GHz/2.4 GHz
MAC Address This shows the MAC address of the WAP6804’s wireless interface.
Wireless Network This shows if the wireless network is enabled or disabled.
Name (SSID) This shows a descriptive name used to identify the WAP6804 in the wireless LAN.
Link Rate (Mbps) This shows the rate at which data is transferred across the wireless network.
Current Channel This shows the channel number which you select manually or the WAP6804 automatically scans
and selects.
Authentication This shows the data encryption method the WAP6804 uses for the wireless connection.
Mode This shows the wireless standard the WAP6804 uses.