ZyXEL Communications WAP6804, Руководство пользователя

Страница: 84 / 114

Chapter 14 Troubleshooting
WAP6804 User’s Guide
84
14.4 Resetting the WAP6804 to Its Factory Defaults
If you reset the WAP6804, you lose all of the changes you have made. The WAP6804 re-loads its default
settings, and the password resets to the back-label default key. You have to make all of your changes
again.
You will lose all of your changes when you reset the WAP6804 to its factory defaults.
To reset the WAP6804,
1
Make sure the power LED is on.
2
Press the RESET button for longer than 5 seconds, the Power LED begins to blink, to set the WAP6804 back
to its factory-default configuration.
OR
3
Click Maintenance > Restore and then click Reset .
If the WAP6804 restarts automatically, wait for the WAP6804 to finish restarting, and log in to the Web
Configurator. The password is in the device label.
If the WAP6804 does not restart automatically,
di
sconnect and reconnect the WAP6804. Then, follow the
directions above again.
14.5 Wireless Problems
I cannot access the WAP6804 or ping any computer from the WLAN.
1
Make sure the WAP6804 is working in AP or Repeater mode and the wireless LAN is enabled on the
WAP6804.
2
Make sure the wireless adapter on the wireless client is working properly.
3
Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports the
same wireless standard as the WAP6804.
4
Make sure your computer (with a wireless adapter installed) is within the transmission range of the
WAP6804.
5
Check that both the WAP6804 and your wireless station are using the same wireless and wireless security
settings.
6
Make sure traffic between the WLAN and the LAN is not blocked by the MAC Address List of the
WAP6804. See
Section 11.7 on page 66 .