ZyXEL Communications WAH7601, Руководство пользователя

Страница: 12 / 111

Chapter 1 Get to Know Your WAH7601
WAH7601 User’s Guide
13
1.6.1 Reset the WAH7601
Remove the lid. Press the reset button for 5 seconds and release it. After a few seconds, the signal LED
blinks red and then the power LED lights green.
This resets the WAH7601 to the factory default configuration. This means that you will lose all
configurations that you had previously, such as WiFi SSID and password.
1.7 WPS Button
Your WAH7601 supports WiFi Protected Setup (WPS), which is an easy way to set up a secure WiFi
network. WPS is an industry standard specification, defined by the WiFi Alliance.
WPS allows you to quickly set up a WiFi network with strong security, without having to configure security
settings manually. Each WPS connection works between two devices. Both devices must support WPS
(check each device’s documentation to make sure). When WPS is activated on a device, it has two
minutes to find another device that also has WPS activated. Then, the two devices connect and set up
a secure network by themselves.
Your WAH7601 WPS button has two functions:
• Press the WPS button for more than 1 second: You can use the WPS button on the side panel of the
WAH7601 to activate WPS in order to quickly set up a WiFi network with strong security. Press the WPS
button for more than 1 second and release it. Press the WPS button on another WPS-enabled device
within range of the WAH7601.
Note: You must activate WPS on the WAH7601 and on another device within 2 minutes of
each other.
• Press the WPS button for more than 5 seconds: You can disable the WAH7601 WiFi network. No device
will be able to connect wirelessly to your WAH7601. Press for more than 5 seconds to re-enable the
WiFi network.