ZyXEL Communications VES-1124 -, Руководство пользователя

Страница: 158 / 203

VES-1124 User’s Guide
24-4 Introduction to CLI
Table 24-1 Command Summary: sys
COMMAND DESCRIPTION
online [on|off] Enables/disables the error log to
be displayed on screen.
romreset Sets the switch back to the factory
default settings.
snmp getCommunity <index> [<community>] Sets or displays the SNMP
GetRequest community.
setCommunity <index> [<community>] Sets or displays the SNMP
SetRequest community.
trustedHost <index>[<host>] Sets or displays the SNMP trusted
host.
trapCommunity <index> [<community>] Sets or displays the SNMP Trap
community.
trapDest <index>[<destination>] Sets or displays the SNMP trap
server.
disp <index|all> Shows SNMP settings.
socket Displays the system socket’s ID #,
type, control block address (PCB),
IP address and port number of
peer device connected to the
socket (Remote Socket) and task
control block (Owner).
stdio [minute] Sets or displays the management
terminal idle timeout value.
syslog server Set syslog server IP address
facility Set syslog facility
type Set/display syslog type flag
mode Set syslog mode
time [hour [min [sec]]] Sets or displays the system time.
trcdisp parse, brief, disp Sets the level of detail that should
be displayed. Use “parse” to
display the most detail and “disp”
to display the least.
trclog
switch [on|off] Enables/disables/ the system trace
log or shows whether it’s on or off.
online [on|off] Enables/disables the trace log
onscreen display (for example in
the telnet management window).
level [level] Sets the level (1-10) of trace logs
(1 shows the least) to display.
type <bitmap> Uses hexadecimal characters to
set the type of trace logs to record.