VES-1124 User’s Guide
Introducing the Web Configurator
4-7
be reset to the default of 9600bps with 8 data bit, no parity, one stop bit and flow control set to none. The password
will also be reset to “1234” and the IP address to 192.168.1.1.
4.5.1
Resetting the VES Via Command
If you know the VES’s password, you can reload the factory-default configuration file via Command Line Interface
(CLI) command. Use the following procedure.
1.
Connect to the console port using a computer with terminal emulation software. See the chapter on
hardware connections for details.
2.
Enter your password.
3.
Type
sys romreset
.
4.
Type
y
at the question “
Do you want to restore default ROM file(y/n)?
”
5.
The device restarts.
Figure 4-4 Resetting the VES Via Command
The switch is now reinitialized with a default configuration file including the default password of “1234”.
4.5.2
Uploading the Default Configuration File Via Console Port
If you forget the VES’s password, you will need to reload the factory-default configuration file via console port.
Use the following procedure.
1.
Connect to the console port using a computer with terminal emulation software. See the chapter on
hardware connections for details.
2.
Disconnect and reconnect the VES’s power to begin a session. When you reconnect the switch’s power,
you will see the initial screen.
3.
When you see the message “
Press any key to enter Debug Mode within 3 seconds
”
press any key to enter debug mode.
Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
VES-1124> sys romreset
Do you want to restore default ROM file(y/n)?y
Restore default Romfile.
OK
System Restart! (Console speed will be changed to 9600 bps)
VES-1124>
Bootbase Version: V1.00(VES-1124) | 04/26/2004 17:12:37
RAM: Size = 16384 Kbytes
FLASH: Intel 16M
ZyNOS Version: V3.50(LP.0)b2 | 05/18/2004 14:45:01
Press any key to enter debug mode within 3 seconds.
............................................................
(Compressed)
Version: RAS VES1124, start: 02049030
Length: 2F24F0, Checksum: 92A1
Compressed Length: EB713, Checksum: 6ABB
Содержание VES-1124 -
