ZyXEL Communications MG1930-30, Руководство пользователя

Страница: 225 / 411

Chapter 26 DHCP Snooping
XMG1930 Series User’s Guide
225
Figure 152 Advanced Application > DHCP Snooping > Configure
Note: The input string of any field in this screen should not contain [ ? ], [ | ], [ ' ], [ " ], or [ , ].
The following table describes the labels in this screen.
Table 104 Advanced Application > DHCP Snooping > Configure
LABEL DESCRIPTION
Active Select this to enable DHCP snooping on the Switch. You still have to enable DHCP
snooping on specific VLAN and specify trusted ports.
Note: If DHCP is enabled and there are no trusted ports, DHCP requests will
not succeed.
DHCP Vlan Select a VLAN ID if you want the Switch to forward DHCP packets to DHCP servers on a
specific VLAN.
Note: You have to enable DHCP snooping on the DHCP VLAN too.
You can enable Option82 in the DHCP Snooping VLAN Configure screen to help the
DHCP servers distinguish between DHCP requests from different VLAN.
Select Disable if you do not want the Switch to forward DHCP packets to a specific
VLAN.
Database If Timeout interval is greater than Write delay interval , it is possible that the next update
is scheduled to occur before the current update has finished successfully or timed out.
In this case, the Switch waits to start the next update until it completes the current one.
Agent URL Enter the location of the DHCP snooping database. The location should be expressed
like this:
tftp://{domain name or IP address}/directory, if applicable/file name ; for
example, tftp://192.168.10.1/database.txt .
Timeout interval Enter how long (10 – 65535 seconds) the Switch tries to complete a specific update in
the DHCP snooping database before it gives up.
Write delay interval Enter how long (10 – 65535 seconds) the Switch waits to update the DHCP snooping
database the first time the current bindings change after an update. Once the next
update is scheduled, additional changes in current bindings are automatically
included in the next update.