ZyXEL Communications MG1930-30, Руководство пользователя

Страница: 184 / 411

Chapter 18 Port Authentication
XMG1930 Series User’s Guide
184
Host-mode Specify how the Switch authenticates users when more than one user connect to the port
(using a hub).
Select Multi-Host to authenticate only the first user that connects to this port. If the first user
enters the correct credential, any other users are allowed to access the port without
authentication. If the first user fails to enter the correct credential, they are all put in the guest
VLAN. Once the first user who did authentication logs out or disconnects from the port, the rest
of the users are blocked until a user does the authentication process again.
Select Multi-Secure to authenticate each user that connects to this port.
Multi-Secure Num If you set Host-mode to Multi-Secure , specify the maximum number of users (between 1 and
24) that the Switch will authenticate on this port.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 82 Advanced Application > Port Authentication > Guest VLAN (continued)
LABEL DESCRIPTION