ZyXEL Communications LTE3316-M604, Руководство пользователя

Страница: 59 / 193

Chapter 7 WAN
LTE3316 Series User’s Guide
59
7.4.2 WAN Management Edit Ethernet
The Zyxel Device has 4 LAN Ethernet ports, you can configure LAN 1 port to work as a WAN port if
needed. This WAN port will work as a fail-over port, which means that if the 3G/4G WAN connection fails,
the Zyxel Device will use the WAN Ethernet connection for backup.
Use this screen to enable the LAN 1 port as a WAN port, and configure its settings. Click the Edit icon in
the Physical Interface: Ethernet row in the Configuration > Network > WAN > Management WAN screen.
Figure 23 WAN Management Edit Ethernet
The following table describes the labels in this screen.
Table 13 WAN Management Edit Ethernet
LABEL DESCRIPTION
Ethernet WAN
Port 1 config as WAN port Select this so the LAN 1 Ethernet port works a WAN port.
WAN Type Select the routing method used by your ISP from the drop-down list box.
Select Static IP if you have a fixed IP address assigned by your ISP.
Select Dynamic IP if you want to obtain an IP address from a DHCP server.
Select PPPoE if your ISP requires your to use a PPPoE connection to the Internet. This
method of connection typically requires you to enter a Username and Password
(provided by your ISP) to gain access to the Internet. You need to ensure that any
PPPoE client software on your computer is removed or disabled.
Dynamic IP WAN Type Configuration
These fields appears when you select Dynamic IP in the WAN Type field.
Host Name Type a host name for the Ethernet WAN interface.