ZyXEL Communications LTE3316-M604, Руководство пользователя

Страница: 109 / 193

LTE3316 Series User’s Guide
109
C
HAPTER
14
Interface Group
14.1 Overview
By default, the four LAN interfaces on the Zyxel Device are in the same group and can communicate
with each other. Creating a new interface will create a new LAN bridge interface (subnet) (for example,
192.168.2.0/24) that acts as a dependent LAN network, and is a different subnet from default LAN
subnet (192.168.1.0/24).
14.2 Interface Group
You can manually add a LAN/WLAN interface to a new group.
Use the DHCP screen to configure the private IP addresses the DHCP server on the Zyxel Device assigns
to the clients in the default and/or user-defined groups. See Chapter 10 on page 90 for more
information.
Use the Interface Group screen to create a new interface group, which is a new LAN bridge interface
(subnet). Click Network > Interface Group to open the following screen.
Figure 60 Network > Interface Group
The following table describes the fields in this screen.
Table 43 Network > Interface Group
LABEL DESCRIPTION
Add Click this button to create a new interface group.
Name This shows the descriptive name of the group.
LAN Interface This shows the interface group.
VID This shows the VLAN ID number (from 0 to 4094) of the interface group.
Actions Click the Delete icon to remove the user-defined group.