Chapter 7 WAN
LTE3316 Series User’s Guide
57
Network Type
Select the type of the network (
4G
or
3G
) to which you want the Zyxel Device to
connect. Otherwise, select
Auto
to have the Zyxel Device connect to an available
network using the default settings on the SIM card. If the currently registered mobile
network is not available or the mobile network’s signal strength is too low, the Zyxel
Device switches to another available mobile network.
Band Selection
Select
Manual
to select the frequency bands the Zyxel Device uses to connect to the
mobile network. Otherwise, select
Auto
to have the Zyxel Device connect to any
available frequency band using the default settings
Band List
Select the frequency bands you want the Zyxel Device to use to connect to the mobile
network.
You can only select the frequency bands from this list if you selected
Manual
in the
Band
Selection
field.
Roaming
3G/4G roaming is to use your mobile device in an area which is not covered by your
service provider. Enable roaming to ensure that your Zyxel Device is kept connected to
the Internet when you are traveling outside the geographical coverage area of the
network to which you are registered.
Dial-Up Profile
Select
Auto-Detection
to have the Zyxel Device use the inserted SIM card’s default
settings to connect to any available mobile network.
Select
Manual
and enter the information provided by your service provider to connect to
the service provider’s mobile network.
APN
Connections with different APNs (Access Point Names) may provide different services
(such as Internet access or MMS (Multi-Media Messaging Service)) and charge method.
The corresponding APN automatically displays when you select a pre-defined service
provider.
If you select
Manual
in the
Dial-Up Profile
field, manually enter the APN provided by your
service provider. You can enter up to 32 ASCII printable characters. Spaces are allowed.
Dial Number
This is the phone number (dial string) used to dial up a connection to your service
provider’s base station. Your service provider should provide the phone number. For
example, *99# is the dial string to establish a GPRS or 3G/4G connection in Taiwan.
The corresponding phone number automatically displays when you select a pre-defined
service provider.
If you select
Others
in the
Service Provider
field, manually enter the phone number
provided by your service provider.
Account
Type the user name (of up to 64 ASCII printable characters) given to you by your service
provider.
Password
Type the password (of up to 64 ASCII printable characters) associated with the user
name above.
Authentication
The Zyxel Device supports PAP (Password Authentication Protocol) and CHAP (Challenge
Handshake Authentication Protocol). CHAP is more secure than PAP; however, PAP is
readily available on more platforms
Select an authentication protocol (
PAP
, or
CHAP
) used by the service provider.
Otherwise, select
Auto
to have the Zyxel Device accept either CHAP or PAP.
IP Type
Select
IPv4
if you want the LTE3202-M430 to run IPv4 only.
Select
IPv6
if you want the LTE3202-M430 to run IPv6 only.
Select
IPv4/IPv6
to allow the LTE3202-M430 to run IPv4 and IPv6 at the same time.
IP Mode
Select
Dynamic IP
if you have a dynamic IP address.
Select
Static IP
if you have a fixed IP address assigned by your service provider.
IP Address
Enter your WAN IP address in this field if you selected
Static IP
in the
IP Mode
field.
Table 12 Management WAN Edit: 3G/4G (continued)
LABEL
DESCRIPTION
Содержание LTE3316-M604
Страница 12: ...12 PART I User s Guide...
Страница 40: ...40 PART II Technical Reference...
