ZyXEL Communications LTE3316-M604, Руководство пользователя

Страница: 142 / 193

Chapter 22 Bandwidth Management
LTE3316 Series User’s Guide
142
22.3 What You Need To Know
The sum of the bandwidth allotments that apply to the WAN interface (LAN to WAN, WLAN to WAN)
must be less than or equal to the upstream bandwidth that you configure in the
Bandwidth
Management > General screen ( Section 22.4 on page 142 ).
The sum of the bandwidth allotments that apply to the LAN interface (WAN to LAN, WAN to WLAN) must
be less than or equal to the downstream bandwidth that you configure in the
Bandwidth Management
> General screen ( Section 22.4 on page 142 ).
22.4 General Settings
Use this screen to have the Zyxel Device apply bandwidth management, configure bandwidth
management rules for the pre-defined services or applications, as well as configure bandwidth
management rule for other services or applications that are not on the pre-defined list of Zyxel Device.
Click Configuration > Management > Bandwidth MGMT to open the bandwidth management General
screen.
Figure 81 Configuration > Management > Bandwidth MGMT > General
The following table describes the labels in this screen.
Table 60 Configuration > Management > Bandwidth MGMT > General
LABEL DESCRIPTION
Configuration
QoS Types Select the Enable check box to turn on QoS to improve your network performance.
Flexible Bandwidth
Management Select Enable to use up to 100% of the configured bandwidth. When disabled, you can only
use up to 33% of the configured bandwidth.
System Resource Configuration