ZyXEL Communications IES4005M, Руководство пользователя

Страница: 74 / 236

Chapter 9 The CLI
IES4005M User’s Guide
74
9.6.2 Privilege Levels for Login Accounts
Login accounts can be configured by the admin account or any login account with a level of 14. The
admin account has a level of 14, so the administrator can run every command. You cannot change
the privilege level of the admin account.
9.6.3 Privilege Levels for Sessions
The session’s privilege level initially comes from the privilege level of the login account the user
used to log in to the IES. After logging in, the user can use the following commands to change the
session’s privilege level.
9.6.3.1 enable Command
This command raises the session’s privilege level to 14. It also changes the session to enable mode,
if necessary. This command is available in user mode or enable mode. The IES does not have the
default password for the enable mode, you have to set a password for it first.
The following command sets the enable password to 123456.
In the following example, the login user account has a privilege level of 0 but knows that the
highest level of enable password is 123456. Afterwards, the session’s privilege level is 14, instead
of 0, and the session changes to enable mode.
9.6.3.2 Password Privilege Command
Use the following command to create passwords for specific privilege levels.
password < password > <1-14>
The following command sets the password for privilege level 13 to pswd13.
9.6.3.3 enable <0-14> Command
This command raises the session’s privilege level to the specified level. It also changes the session
to enable mode, if the specified level is 13 or 14. This command is available in user mode or enable
mode, and users have to know the password for the specified privilege level.
ras# config
ras(config)# password 123456
ras(config)#
ras# enable
Password: 123456
ras#
ras(config)# password pswd13 privilege 13