ZyXEL Communications IES4005M, Руководство пользователя

Страница: 206 / 236

Chapter 27 IEEE 802.1x Authentication
IES4005M User’s Guide
206
The following section lists the commands for this feature.
Table 137
dot1x command summary
Command Description M P
dot1x active
Enables IEEE 802.1x authentication. C 13
show dot1x
Displays IEEE 802.1x authentication settings. E 3
no dot1x active
Disables IEEE 802.1x authentication. C 13
dot1x server radius index <1-16>
Configures an entry for RADIUS authentication server settings. C 13
address < ip-address >
Configures the authentication server’s IP address. C 13
port <1-65535>
Configures the authentication server’s port for 802.1x
authentication. C 13
secret < string >
Configures a secret password shared with the RADIUS server.
string
: 1~31 printable characters
C 13
no dot1x server radius index <1-16>
Clears the specified entry from the RADIUS authentication server
settings. C 13
show dot1x server radius
Displays all RADIUS authentication server settings. E 3
interface dsl < slot/portlist >
Enters the sub-command mode for configuring the specified DSL
port(s). C 13
dot1x active
Enables 802.1x port authentication. C 13
dot1x control <auto|auth|unauth>
Configures the 802.1x port authentication option.
auto
: authenticate all subscribers before they can access the
network through the port(s).
auth
: allow all connected users to access the network through the
port(s) without authentication.
unauth
: deny all subscribers access to the network through the
port(s).
C 13
dot1x server radius index < index >
Specifies a RADIUS server used for the port authentication. You have
to configure the RADIUS server using the
dot1x server radius
index
command before using this command.
C 13
dot1x auth-once
Stops user re-authentication for the ports. The subscribers will not
need to periodically re-enter their usernames and passwords to stay
connected to the port. C 13
dot1x period <60-65535>
Configures how often in seconds a client has to re-enter his or her
username and password to stay connected to the port(s). C 13
dot1x circuit-id option-info
< info >
Sets the DHCP option 82 Circuit ID format.
Note: Make sure your RADIUS authentication server is option-82
capable before using this command.
C 13
no dot1x active
Disables 802.1x port authentication. C 13
no dot1x control
Resets the 802.1x port authentication option setting to the default. C 13
no dot1x auth-once
Enables user re-authentication for the ports. The subscribers have to
periodically re-enter their usernames and passwords to stay
connected to the ports. C 13
no dot1x period
Resets the 802.1x re-authentication period to the default. C 13
no dot1x circuit-id
Disables the DHCP option 82 on the ports. C 13