ZyXEL Communications GS1900 Series, Руководство пользователя

Страница: 46 / 263

Chapter 5 Web Configurator
GS1900 Series User’s Guide
46
G e tting Sta rt
screen appears every time you log in using the default user name and default password.
5
If you did not change the default administrator password and/or SNMP community values, a warning
screen displays each time you log into the Web Configurator. Click
Pa sswo rd / SNMP
to open a screen
where you can change the administrator and SNMP passwords simultaneously. Otherwise, click Ignore
to close it.
Fig ure 50
Web Configurator: Warning
Fig ure 51
Web Configurator: Password
Change the default administrator and/or SNMP passwords, and then click
Apply
to save your changes.
Table 7 Web Configurator: Password > Users/SNMP
LABEL DESC RIPTIO N
User This is the default administrator account with the “admin” user name. You cannot change the
default administrator user name.
Old Password Type the existing system password (
1234
is the default password when shipped).
New Password Enter your new system password.
New Password
Confirm Retype your new system password for confirmation.
SNMP
Use this section to specify the SNMP community (password) and access right values.
Community Enter a string identifying the community name that this entry should belong to. The allowed
string length is 1 to 20, and the allowed content is ASCII characters from 33 to 126.
Access Right Select the access mode for this entry. The possible values are
Re a d- O nly
and
Re a d- Write
.