ZyXEL Communications Dimension GS-3012F, Руководство пользователя

Страница: 202 / 235

Dimension GS-3012F Gigabit Ethernet Switch
29-6 Command Examples
<remote-file> = Specifies the name of the configuration file.
This command backs up the current configuration file on a TFTP server. The following example backs up the
current configuration to a file (
test.cfg
) on the TFTP server (
172.23.19.96
).
Figure 29-10 CLI: Backup Configuration Example
29.6.2 Restoring Configuration
Syntax:
copy tftp config <index> <ip> <remote-file>
where
<index>
= Specifies to restore which configuration file (1 or 2) on the switch.
<ip>
= The IP address of a TFTP server from which you want to get the backup
configuration file.
<remote-file> = Specified the name of the configuration file.
This command restores a configuration file on the switch. The following example uploads the configuration file
(
test.cfg
) from the TFTP server (
172.23.19.96
) to the switch.
Figure 29-11 CLI: Restore Configuration Example
29.6.3 Using a Different Configuration File
You can store up to two configuration files on the switch. Only one configuration file is used at a time. By default
the switch uses the first configuration file (with an index number of 1). You can set the switch to use a different
configuration file. There are two ways in which you can set the switch to use a different configuration file: restart
the switch (cold reboot) and restart the system (warm reboot).
Use the boot config command to restart the switch and use a different configuration file (if specified). The
following example reboots the switch to use the second configuration file.
GS-3012F# copy running-config tftp 172.23.19.96 test.cfg
Backuping
. (599)Bytes Done!
GS-3012F#
GS-3012F# copy tftp config 1 172.23.19.96 test.cfg
Restoring
. (599)Bytes Done!
GS-3012F#