ZyXEL Communications Dimension GS-3012F, Руководство пользователя

Страница: 182 / 235

Dimension GS-3012F Gigabit Ethernet Switch
28-10 Introduction to CLI
Table 28-2 Command Summary: Enable Mode
COMMAND DESCRIPTION
tftp config <ip>
<remote-file>
Restores configuration with the specified
filename from the specified TFTP server.
flash <ip>
<remote-file>
Restores firmware via TFTP.
ping <ip|host-name>
[<in-band|out-of-
band|vlan <vlan-id>]
[size <0-1472>]
[-t]
Sends a Ping request to an Ethernet
device.
traceroute <ip|host-name>
[in-band|out-of-
band|vlan <vlan-id>]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a
device.
ssh <1|2> <[user@]dest-
ip>
Connects to an SSH server with the
specified SSH version.
28.9.3 Configure Mode
The following table lists the commands in Configuration (or Config) mode.
Table 28-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
help
Displays help information.
logout Exits from the CLI.
history Displays a list of previously
command(s) that you have
executed.
exit Exits from the CLI.
mode zynos Changes the CLI mode to the
ZyNOS format.
password Change the password for Enable
mode.
no ip Sets the management IP address
to the default value.
route <ip> <mask>
inactive
Enables a specified IP static route.
route <ip> <mask> Removes a specified IP static
route.